Dr. Christophe Pierre

PROVOST AND VICE PRESIDENT FOR ACADEMIC AFFAIRS
PROFESSOR, DEPARTMENT OF MECHANICAL ENGINEERING
School: Schaefer School of Engineering & Science
Department: Mechanical Engineering
Building: Howe Center
Room: 1204
Phone: 210.216.5263
Email: christophe.pierre@stevens.edu
Education

Doctor of Philosophy in Mechanical Engineering
Duke University

Master of Science in Mechanical Engineering
Princeton University

Diplôme d’Ingénieur de l’Ecole Centrale de Paris (Department of Aerospace Engineering)
Ecole Centrale des Arts et Manufactures de Paris

Research
  • Structural dynamics and vibrations
  • Nonlinear dynamics
  • Elastic wave propagation
  • Aeroelasticity
  • Vibration localization phenomena in disordered periodic structures
  • Probabilistic structural dynamics with parameter uncertainties
  • Mid- and high-frequency vibration transmission
  • Dynamics of mistuned bladed-disk assemblies and rotating systems
  • Normal modes and modal analysis for nonlinear systems
  • Dynamics of dry-friction damped and non-smooth systems
  • Automotive and aerospace structure applications
  • Structural design and topology optimization
Experience
  • Provost and Vice President for Academic Affairs, Stevens Institute of Technology, August 2016-present
  • Professor, Department of Mechanical Engineering, Stevens Institute of Technology, August 2016-present
  • Vice President for Academic Affairs, University of Illinois, October 2011-August 2016
  • Professor, Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, October 2011-August 2016
  • Dean, Faculty of Engineering, McGill University, July 2005-October 2011
  • Professor, Department of Mechanical Engineering, McGill University, July 2005-October 2011
  • Canada Research Chair in Structural Dynamics and Vibration – Tier I, McGill University, October 2005-October 2011
  • Adjunct Professor, McGill University, October 2011-September 2013
  • Stephen P. Timoshenko Collegiate Professor of Mechanical Engineering, University of Michigan, March 2002-June 2005
  • Associate Dean for Academic Programs and Initiatives, Horace H. Rackham School of Graduate Studies, University of Michigan, 1999-2005 (50 percent appointment September 1999-August 2002; 75 percent appointment effective September 2002)
  • Professor of Mechanical Engineering, University of Michigan, 1997-2005
  • Associate Chairman, Department of Mechanical Engineering and Applied Mechanics, University of Michigan, 1996-1999
  • Chair, Mechanical Engineering Graduate Program, Rackham School of Graduate Studies, University of Michigan, 1996-1998
  • Director, Academic Services Office, Department of Mechanical Engineering, University of Michigan, 1996-1998
  • Associate Director, Automotive Research Center, College of Engineering, University of Michigan, 1994-2005
  • Associate Professor of Mechanical Engineering and Applied Mechanics, University of Michigan, 1991-1997
  • Assistant Professor of Mechanical Engineering and Applied Mechanics, University of Michigan
  • 1985-1991, Adjunct Professor, 2005-2009
  • Professeur Invité, Ecole Centrale de Nantes, France, June-July 2010, July 2004, May 2003, February 2003, September-December 2001, November-December 2000
  • Professeur Invité, Ecole Centrale de Paris, August-December 1992
  • Graduate Research Assistant, Duke University, August 1983-August 1985
  • Graduate Research Assistant, Princeton University, July 1982-August 1983
  • Research Engineer, Avions Marcel Dassault-Breguet Aviation, France, March-July 1982
Consulting Service
  • General Motors Research Laboratories, Engineering Mechanics Department, Warren, Michigan.
  • Institute for Computational Mechanics in Propulsion (ICOMP), NASA Lewis Research Center, Cleveland, Ohio.
  • Johnson Controls, Inc., Automotive Systems Group, Plymouth, Michigan.
  • Société Nationale d'Etude et de Construction de Moteurs d'Aviation (SNECMA), Moissy Cramayel, France.
  • Williams International, Walled Lake, Michigan.
  • General Electric Aircraft Engines, Cincinnati, Ohio.
  • Elliott Turbomachinery Company, Jeannette, Pennsylvania.
  • MKP Structural Design Associates, Inc., Ann Arbor, Michigan

Technology Transfer:

  • Software Invention Disclosures, “REDUCE: A Computer Program for Developing a Reduced-Order Model and Predicting the Vibratory Response of Mistuned Bladed Disk Assemblies,” C. Pierre and M. P. Castanier, Office of Technology Transfer, The University of Michigan, April 2002; and TURBO-REDUCE, February 2003.  Non-exclusive licenses have been signed with:
    • N&R Engineering, Inc.
    • Mitsubishi
    • Arizona State University
    • MTU Aero Engines GmbH
    • SNECMA, Safran Group
  • Disclosure and Record of Invention (AF Form 1279), “Programmable Multi-Channel Amplitude and Phase Shifting Circuit,” K. W. Jones, C. Pierre, S. L. Ceccio, J. Judge, S. Fuchs, Air Force Research Laboratories, April 2002.
  • “Programmable Multi-Channel Amplitude and Phase Shifting Circuit,” United States Patent No. US 7,728,576 B1, June 1, 2010.

Spin-off Business: MKP Structural Design Associates, Inc., Ann Arbor, Michigan

  • Incorporated since September 2001
  • Founder (with Z.-D. Ma and N. Kikuchi) and Technical Advisor
  • A number of Phase I and II SBIR federal contracts have been awarded, primarily from the U.S. Army and U.S. Air Force.
Honors & Awards
  • Fellow, National Academy of Inventors, 2016
  • Doctorate Honoris Causa, Kharkov Polytechnic Institute (KhPI), National Technical University, Kharkov, Ukraine, October 2011.
  • Fellow, The American Academy of Mechanics, 2009.
  • N. O. Myklestad Award, The American Society of Mechanical Engineers, 2005.
  • Best Paper Award, ASME Design Engineering Division, Vehicle Design Committee, “Function-Oriented Material Design for Next-Generation Ground Vehicles,” ASME Paper IMECE2003-43326, 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, D.C.
  • Stephen P. Timoshenko Chaired Professorship, College of Engineering, University of Michigan, 2002.
  • College of Engineering Research Excellence Award, University of Michigan, 1998.
  • Fellow, The American Society of Mechanical Engineers.
  • Fellow, Committee on Institutional Cooperation, Academic Leadership Program (selected in 1997).
  • 1995 Faculty Service Award, Department of Mechanical Engineering and Applied Mechanics, University of Michigan.
  • 1993 Faculty Research Award, Department of Mechanical Engineering and Applied Mechanics, University of Michigan.
  • Exxon Foundation Award for Outstanding Teaching by an Assistant Professor, Department of Mechanical Engineering and Applied Mechanics, University of Michigan, 1986.
Professional Societies

Service to Government and Professional Organizations

Editorial Activities

  • Associate Editor, ASME Journal of Computational and Nonlinear Dynamics, 2005-2011
  • Associate Editor, AIAA Journal2000-2006
  • Associate Editor, ASME Journal of Vibration and Acoustics, 1992-2000
  • Member, Advisory Board, Nonlinear Dynamics, 1994-2008
  • Member, Editorial Advisory Board, ASME Applied Mechanics Reviews, 1999-2009
  • Member, Editorial Board, International Journal of Reliability and Safety, 2005-present
  • Member, Editorial Board, Edition Ecole Centrale de Nantes (EECN), 2011-present [University Press of the Ecole Centrale]

Professional Society Membership

  • Fellow, American Society of Mechanical Engineers
  • Fellow, American Academy of Mechanics
  • Senior Member, American Institute of Aeronautics and Astronautics (since 1986)
  • Member, American Society for Engineering Education (since 2001)
  • Ingénieur, Ordre des Ingénieurs du Québec

Professional Committee Membership

  • Member, ASME Technical Committee on Multibody Systems and Nonlinear Dynamics (January 2005-2011)
  • Member, Structures and Dynamics Committee, ASME International Gas Turbine Institute
  • Former Member and Friend, ASME Technical Committee on Vibration and Sound
  • Member, National Executive Committee, EMERGE (Empowering Minority Engineers/Scientists to Reach for Graduate Education) Consortium, 2001-2005
  • President (2007-08) and Secretary (2006-07), Comité des Doyens d’Ingénierie du Québec (CODIQ)
  • Member, CODIQ, 2005-2011
  • Member, [Canadian] National Council of Deans of Engineering and Applied Sciences (NCDEAS), 2005-2011
  • Member, NCDEAS Education Committee, 2008-2011

Conference Chairs and Scientific Committees

  • Member, Scientific Committee, International Conference on Nonlinear Dynamics-KPI 2004, Kharkov Polytechnical Institute, Kharkov, Ukraine, September 14-16, 2004
  • Member, International Scientific Committee, Third International Symposium on Stability Control of Rotating Machinery (ISCORMA-3), Cleveland, Ohio, September 19-23, 2005
  • Member, Scientific Committee, Recent Advances in Nonlinear Mechanics-RANM 2005, Aberdeen, Scotland, August 30-September 1, 2005.
  • Co-Chairman, The Second International Conference on Dynamics, Vibration and Control, Beijing, China, August 23-26, 2006.
  • Member, Scientific Committee, Conference on Topical Problems in Applied Mathematics and Mechanics, Kharkov Polytechnical Institute, Kharkov, Ukraine, October 23-26, 2006.
  • Member, International Scientific Committee, 8ième Colloque National en Calcul des Structures, Giens, France, May 21-25, 2007.
  • Co-Chairman, and member of Scientific Committee, Second International Conference on Nonlinear Dynamics, Kharkov, Ukraine, September 25-28, 2007 (in honor of Alexander M. Lyapunov).
  • Member, International Scientific Committee, 9ième Colloque National en Calcul des Structures, Giens, France, May 25-29, 2009.
  • Member, Scientific Committee, Euromech Colloquium 503 “Nonlinear Normal Modes, Dimension Reduction and Localization in Vibrating systems,” September 27-October 2, 2009, Frescati, Italy.
  • Member, Scientific Committee, The Third International Conference on Dynamics, Vibration and Control, Hangzhou, China, May 12-14, 2010.
  • Co-Chairman, and member of Scientific Committee, Third International Conference on Nonlinear Dynamics, Kharkov, Ukraine, September 21-24, 2010.
  • Member, Scientific Committee, 10ième Colloque National en Calcul des Structures, Giens, France, May 9-13, 2011.
  • Co-Chairman, and member of Scientific Committee, Fourth International Conference on Nonlinear Dynamics, Sevastopol, Ukraine, June 19-22, 2013.
  • Member, International Scientific Committee, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM2013, Montreal, Canada, July 23-26, 2013.
  • Member, Scientific Committee, International Conference on Vibration Problems ICOVP 2013, Lisbon, Portugal, September 9-12, 2013.
  • Member, Scientific Committee, 13th Conference Dynamical Systems Theory and Applications, Lodz, Poland, December 7-10, 2015. 

External Review and Advisory Board Activities

  • External Review Team Member, Master of Science in Engineering Program in Automotive Systems Engineering, University of Michigan–Dearborn, March 2003
  • Member, International Advisory Board, Centre for Applied Dynamics Research, University of Aberdeen, Scotland, United Kingdom, March 2003-present
  • External Evaluation Team Member, Master of Science in Engineering Program in Mechanical Engineering, University of Michigan–Dearborn, February 2004
  • Chair, Scientific Orientation and Evaluation Committee, Department of Structural Dynamics and Coupled Systems, Office National d’Etudes et de Recherches Aérospatiales (ONERA), Châtillon, France, March 2004
  • Member, Global Advisory Board, Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejon, Korea, 2006-2008
  • Member, Dean’s Advisory Council, College of Engineering, California Polytechnic State University, San Luis Obispo, California, 2006-2010
  • Member, Board of Directors, Consortium for Research and Innovation in Aerospace in Quebec (CRIAQ), 2006-2011
  • Member, Executive Committee, Consortium for Research and Innovation in Aerospace in Quebec (CRIAQ), 2006-2011; Secretary of CRIAQ, 2006-2008 & 2010-2012
  • Member, External Review Group, Texas A&M University at Qatar, Doha, Qatar, 2009-present.
  • Member, Scientific Advisory Board (Conseil d’Orientation Scientifique), Carnot Institute FEMTO-Sciences & Technologies, Université de Franche-Comté, France, 2010
  • Member, International Visiting Committee, Department of Engineering, University of Cambridge, United Kingdom, 2014-present.
  • Member, Scientific Evaluation Committee, Department of Structural Dynamics and Coupled Systems, Office National d’Etudes et de Recherches Aérospatiales (ONERA), Châtillon, France, December 2015

Proposal & Awards Review Activities

  • Panelist and reviewer, National Science Foundation, Dynamic Systems and Control Program; Participation in review panels for various awards on a regular basis from 1987 to 2008.
  • Reviewer, National Science Foundation, Division of International Programs.
  • Panelist and reviewer, National Science Foundation Small Business Innovation Research Program, Phases I and II.
  • Reviewer, Army Research Office
  • Reviewer, Engineering Foundation (ASME)
  • Reviewer, Department of Energy, Division of Engineering and Geosciences
  • Reviewer, Natural Sciences and Engineering Research Council (NSERC) of Canada
  • Member, Interdisciplinary Adjudication Committee (IAC), Canada Research Chairs, 2009-2012
  • Member, Natural Sciences and Engineering Panel, The Ontario Premier’s Discovery Awards Program, 2010
  • Member, Ordre des Ingénieurs du Québec Panel, Grand Prix d’excellence, 2011
  • Member, Mechanical Engineering Evaluation Group (EG), Natural Sciences and Engineering Research Council of Canada (NSERC), 2014-2017
  • Reviewer, Foundation for Polish Science, 2015

External Referee for Promotion and Tenure Reviews at Various Institutions

  • Boston University
  • Catholic University of America
  • Clarkson University
  • Columbia University
  • Harvey Mudd College
  • Massachusetts Institute of Technology
  • Michigan State University
  • National Technical University, Athens, Greece
  • Ohio State University
  • Oakland University
  • Rensselaer Polytechnic Institute
  • Technion, Israel Institute of Technology
  • University of Alaska
  • University of Maryland
  • University of Southern California
  • University of Connecticut
  • University of Washington
  • Wayne State University
  • Wright State University
  • Université Paul Sabatier, Toulouse, France

External Evaluator (Ph.D. Dissertations, Habilitation à Diriger des Recherches)

  • Conservatoire National Des Arts et Métiers, France
  • Ecole Centrale de Nantes, France
  • Ecole Centrale de Paris, France
  • Ecole Centrale de Lyon, France
  • Ecole Nationale Supérieure des Techniques Avancées (ENSTA), France
  • Hong Kong University, Republic of China
  • Université de Franche-Comté, France
  • Université Pierre et Marie Curie – Paris VI, France

Journal Review Activities

  • ASME Journal of Applied Mechanics
  • ASME Journal of Vibration and Acoustics
  • ASME Journal of Dynamic Systems, Measurement and Control
  • ASME Journal of Energy Resources Technology
  • ASME Journal of Gas Turbine and Power
  • Journal of Sound and Vibration
  • AIAA Journal
  • AIAA Journal for Propulsion and Power
  • ASCE Journal of Engineering Mechanics
  • Journal of Mechanical Systems and Signal Processing
  • International Journal of Non–Linear Mechanics
  • International Journal of Solids and Structures
  • Journal of the Acoustical Society of America
  • Nonlinear Dynamics
  • Proceedings of the Royal Society: Mathematical and Physical Sciences
  • Journal of Nonlinear Science
  • Journal of Vibration and Control

Symposia Organized and Sessions Chaired

  • Organizer and Chairman, session “Nonlinear Dynamics,” 26th Annual Meeting of the Society of Engineering Science, Ann Arbor, Michigan, September 18-20, 1989.
  • Chairman, session “Components and Systems Vibration,” 35th ASME Gas Turbine Conference, Brussels, June 11-14, 1990.
  • Chairman, session “Unsteady Flow Phenomena and Forced Response of Turbomachinery,” AIAA/ASME Joint Propulsion Conference, Sacramento, California, June 24-27, 1991.
  • Co-Chairman, session “Turbomachinery Dynamics,” 34th AIAA/ASME Structures, Structural Dynamics and Materials Conference, La Jolla, California, April 19-22, 1993.
  • Chairman, session “Flutter and Forced Response,” 38th ASME Gas Turbine Conference, Cincinnati, Ohio, May 24-27, 1993.
  • Organizer (with N. C. Perkins), symposium “Structural Dynamics of Large-Scale and Complex Systems” (three sessions), 14th ASME Vibration and Noise Conference, Albuquerque, New Mexico, September 19-22, 1993.  Chairman for one session.
  • Organizer (with J. P. Cusumano), symposium “Aerospace Structures: Nonlinear Dynamic and System Response” (two sessions), ASME 1993 Winter Annual Meeting, New Orleans, Louisiana, November 28-December 3, 1993.  Chairman for one session.
  • Chairman, session “Multibody Dynamics II,” Sixth Conference on Nonlinear Vibrations, Stability, and Dynamics of Structures, Blacksburg, Virginia, June 9-13, 1996.
  • Chairman, session “Rotors,” Sixth Conference on Nonlinear Vibrations, Stability, and Dynamics of Structures, Blacksburg, Virginia, June 9-13, 1996.
  • Organizer and Chairman, session “Vehicle Suspension, Track and Structure,” Critical Technologies for Modeling and Simulation of Ground Vehicles Conference, Ann Arbor, Michigan, May 29-30, 1996.
  • Organizer, symposium “Mode Localization and Nonlinear Normal Modes” (two sessions), 16th ASME Biennial Conference on Mechanical Vibration and Noise, Sacramento, California, September 1997; Chairman for one session and vice-chairman for the other.
  • Chairman, symposium “Dynamics, Acoustics and Simulations: Application, Modeling and Simulation—II,” ASME 1998 International Mechanical Engineering Congress and Exposition, Anaheim, California, November 1998.
  • Chairman, session “Nonlinear Vibrations and Perturbation Methods,” Ali Nayfeh Symposium, 1999 ASME Mechanics and Materials Conference, Blacksburg, Virginia, June 27-30, 1999.
  • Organizer (with S. W. Shaw), two-session symposium “Nonlinear Modes and Localization in Coupled Dynamical Systems,” 17th ASME Biennial Conference on Mechanical Vibration and Noise, Las Vegas, Nevada, September 12-15, 1999.  Chairman for one session.
  • Chairman, session “Dynamics and Identification,” Symposium on “Nonlinear Response of Hysteretic Oscillators,” 17th ASME Biennial Conference on Mechanical Vibration and Noise, Las Vegas, Nevada, September 12-15, 1999.
  • Chairman and organizer, session “Recruitment of Minorities to the Professorate,” National Science Foundation Minority Graduate Education/EMERGE Workshops, Atlanta, Georgia, February 24-25, 2000.
  • Organizer (with M.P. Mignolet), three-session symposium “Natural and Forced Vibrations of Bladed Disk Assemblies,” ASME Turbo Expo 2000, Munich, Germany, May 2000.  Chairman for one session and vice-chair for two sessions.
  • Organizer (with S. W. Shaw), symposium “Nonlinear Modal Analysis,” 18th Biennial Conference on Mechanical Vibration and Noise, Pittsburgh, Pennsylvania, September 9-12, 2001.  Chairman for one session.
  • Chairman, session “Rotor Dynamics,” Ninth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-9), Honolulu, Hawaii, February 10-14, 2002.
  • Chairman, session “Recent Progress in NVH Analysis,” Ninth Annual Automotive Research Center (ARC) Conference on Modeling and Simulation of Ground Vehicles, Auburn Hills, Michigan, May 12-13, 2003.
  • Chairman, session “Milieux Granulaires,” Sixième Colloque National en Calcul des Structures, Giens, France, May 20-23, 2003.
  • Chairman, session “Nonlinear Dynamics for Design;” Bifurcations: The Use and Control of Chaos; Southampton, United Kingdom, 28-30 July 2003.
  • Chairman, session “System Identification and Reduced Order Modeling with Applications to Linear and Nonlinear Systems: System Identification,” 19th Biennial Conference on Mechanical Vibration and Noise, Chicago, Illinois, September 2-6, 2003.
  • Chairman, session “Vibrations II,” Tenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-10), Honolulu, Hawaii, March 7-11, 2004.
  • Chairman, session “Recent Progress in NVH Analysis,” Tenth Annual Automotive Research Center (ARC) Conference on Modeling and Simulation of Ground Vehicles, Ann Arbor, Michigan, May 18-19, 2004.
  • Chairman, plenary session “Vibro-Acoustique,” 14ème Colloque Vibrations, Chocs et Bruit, Lyon, France, June 16-18 2004.
  • Chairman, General Session, International Conference on Nonlinear Dynamics-KPI 2004, Kharkov Polytechnical Institute, Kharkov, Ukraine, September 14-16, 2004
  • Chairman, session “Identification,” Noise and Vibration: Emerging Methods (NOVEM 2005), Saint-Raphaël, France, April 18-21, 2005.
  • Organizer (with M. P. Castanier), symposium “Vibration of Complex Structures,” 20th Biennial Conference on Mechanical Vibration and Noise, Long Beach, California, September 2005.  Chairman and co-chairman for two sessions.
  • Co-Chairman, Plenary Session, The Second International Conference on Dynamics, Vibration and Control, Beijing, China, August 23-26, 2006.
  • Co-Chairman, session “Modeling, Vibration and Control of Rotor Systems,” 20th Biennial Conference on Mechanical Vibration and Noise, Las Vegas, Nevada, September 4-7, 2007.
  • Co-Chairman, General Session, Second International Conference on Nonlinear Dynamics, Kharkov, Ukraine, September 25-28, 2007.
  • Organizer (with M. Legrand and D. Laxalde), symposium “Nonlinear Mechanisms in Bladed Disk Assemblies” (two sessions), 22nd Biennial Conference on Mechanical Vibration and Noise, San Diego, California, September 2009.
  • Chairman, General Session, Third International Conference on Nonlinear Dynamics, Kharkov, Ukraine, September 21-24, 2010.
  • Chairman, General Session, Fourth International Conference on Nonlinear Dynamics, Sevastopol, Ukraine, June 19-22, 2013.

Book Reviews

  1. C. Pierre, Review of Normal Modes and Localizationin Nonlinear Systems, by A. F. Vakakis et al., ASME Applied Mechanics Reviews, Vol. 51, No. 5, 1998, p. B42.

  2. C. Pierre, Review of Asymptotic Approaches in Nonlinear Dynamics, by J. Awrejcewicz et al., ASME Applied Mechanics Reviews, Vol. 53, No. 2, 2000, pp. B11-B12.

  3. C. Pierre, Review of Mechanics and Dynamical Systems with Mathematicaâ, by N. Bellomo et al., ASME Applied Mechanics Reviews, Vol. 54, No. 1, 2001, pp. B4-B5.

  4. C. Pierre, Review of Infinite-Dimensional Dynamical Systems: An Introduction to Dissipative Parabolic PDEs and the Theory of Global Attractors, by J.C. Robinson, ASME Applied Mechanics Reviews, Vol. 56, No. 4, 2003, p. B54.

Chapters in Books and Books Edited

  1. [C. Pierre with E.H. Dowell] “Chaotic Oscillations in Mechanical Systems,” in Chaos in Nonlinear Dynamical Systems,Edited by J. Chandra, SIAM, 1985.

  2. “Vibration Localization by Disorder—A Viable Alternative to Damping?” in Elastic Wave Propagation and Ultrasonic Nondestructive Evaluation, S. K. Datta, J. D. Achenbach and Y. S. Rajapakse (Editors), Elsevier Science Publishers B. V. (North-Holland), 1990.

  3. Structural Dynamics of Complex and Large Scale Systems, ASME DE-Vol. 59 (Proceedings of the 14th Biennial Conference on Mechanical Vibrations and Noise), Edited by C. Pierre and N.C. Perkins, 1993.

  4. Aerospace Structures: Nonlinear Dynamics and System Response, ASME AD-Vol. 33 (Proceedings of the 1993 Winter Annual Meeting), Edited by J.P. Cusumano, C. Pierre, and S.T. Wu, 1993.

  5. [with S.W. Shaw] “Normal Modes and Modal Analysis Techniques for Nonlinear Structural Systems,” in Nonlinear Dynamics and Stochastic Mechanics, CRC Mathematical Modeling Series, 95-119, N. Sri Namachchivaya and W. Kliemann (Editors), CRC Press, 1995.

  6. [with J. Guillen] “An Efficient, Hybrid, Frequency-Time Domain Method for the Dynamics of Large-Scale Dry-Friction Damped Structural Systems,” IUTAM Symposium on Unilateral Multibody Contacts, Edited by F. Pfeiffer and Ch. Glocker, Kluwer Academic Publishers (Dordrecht), 1999.

  7. “Localization Phenomena in Structural Dynamics,” in Stability of Gyroscopic Systems, Series on Stability, Vibration and Control of Systems, Series A, Vol. 2, Edited by A. Guran, A. Bajaj, Y. Ishida, N. Perkins, G. D’Eleuterio, and C. Pierre, World Scientific Publishing, Singapore, 1999.

 Papers in Refereed Conference or Symposium Proceedings

  1. “Computational Methods for Structural Systems with Statistical Properties,” NSF Study on Supercomputers in Mechanical Systems Research, Livermore, California, September 12-14, 1984.

  2. [with Tang, D. M., and Dowell, E. H.] “Localized Vibrations of Disordered Multi-Span Beams:  Theory and Experiment,” 27th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, May 19-21, 1986, San Antonio, Texas.

  3. “Localized Free and Forced Vibrations of Nearly Periodic Disordered Structures,” 28th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 6-9, 1987, Monterey, California.

  4. “Mode Localization and Eigenvalue Loci Veering Phenomena in Disordered Structures,” 20th Midwestern Mechanics Conference, August 31-September 2, 1987, Purdue University, West Lafayette, Indiana.

  5. [with Wei, S. T.] “Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry.  Part I: Free Vibrations,” and “...Part II: Forced Vibrations,” 11th Biennial ASME Conference on Vibrations and Noise, September 27-30, 1987, Boston.  InBladed Disk Assemblies, DE-Vol 6, Edited by R. Kielb, pp. 61-79.

  6. “Weak and Strong Vibration Localization in Disordered Structures:  A Statistical Investigation,” 29th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 18-20, 1988, Williamsburg, Virginia.

  7. “Localization of Vibrations by Structural Irregularity,” Dynamic Systems and Control Program Review, National Science Foundation, Washington, D. C., June 8, 1988 (invited contribution).

  8. [with Wei, S. T.] “A Statistical Analysis of the Effects of Mistuning on the Forced Response of Cyclic Assemblies,” 30th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 3-5, 1989, Mobile, Alabama.

  9. “Damping-Like Effects of Random Irregularities in Periodic Structures,” 12th Canadian Congress of Applied Mechanics (CANCAM '89), Ottawa, Canada, May 28-June 2, 1989.

  10. [with Cha, P. D.] “Vibration Localization by Disorder in Assemblies of Mono-Coupled, Multi-Mode Component Systems,” AIAA Dynamics Specialists Conference, April 5-6, 1990, Long Beach, California.

  11. [with Shen, M.-H. H.] “Natural Modes of Bernoulli-Euler Beams with a Single-Edge Crack,” 31th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 2-4, 1990, Long Beach, California.

  12. [with Chen, W.-J.] “Exact Linear Dynamics of Periodic and Disordered Truss Beams:  Localization of Normal Modes and Harmonic Waves,” AIAA paper 91-1114, 32nd AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 8-10, 1991, Baltimore, Maryland.
  13. [with Murthy, D. V.] “Aeroelastic Modal Characteristics of Mistuned Blade Assemblies:  Mode Localization and Loss of Eigenstructure,” AIAA paper 91-1218, 32nd AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April 8-10, 1991, Baltimore, Maryland; Also NASA Technical Memorandum 104519.

  14. [with Smith, T. E., and Murthy, D. V.] “Localization of Aeroelastic Modes in Mistuned High-Energy Turbines,” AIAA paper 91-3379, 27th AIAA/ASME Joint Propulsion Conference, June 24-27, 1991, Sacramento, California; Also NASA Technical Memorandum 104445.

  15. [with Castanier, M. P.] “Individual and Interactive Mechanisms for Localization and Dissipation in a Mono-Coupled Nearly Periodic Structure,” AIAA paper 92-2212, Proceedings of the 33rd AIAA/ASME Structures, Structural Dynamics and Materials Conference, Dallas, Texas, April 13-15, 1992.

  16. [with Chen, W.-J.] “Vibration Localization and Wave Conversion Phenomena in a Multi-Coupled, Nearly Periodic, Disordered Truss Beam,” AIAA paper 92-2115, Proceedings of the AIAA Dynamics Specialists Conference, Dallas, Texas, April 16-17, 1992. 

Selected Publications
Book Chapters
  1. A. Guran, A. Bajaj, Y. Ishida, N. Perkins, G. D’Eleuterio, and C. Pierre. (1999). "Localization Phenomena in Structural Dynamics", Stability of Gyroscopic Systems, A. Guran, A. Bajaj, Y. Ishida, N. Perkins, G. D’Eleuterio, and C. Pierre, Series on Stability, Vibration and Control of Systems, Series A.
  2. C. Pierre with J. Guillen. (1999). "An Efficient, Hybrid, Frequency-Time Domain Method for the Dynamics of Large-Scale Dry-Friction Damped Structural Systems", IUTAM Symposium on Unilateral Multibody Contacts, F. Pfeiffer and Ch. Glocker, Kluwer Academic Publishers .
  3. C. Pierre with S.W. Shaw. (1995). "Normal Modes and Modal Analysis Techniques for Nonlinear Structural Systems", Nonlinear Dynamics and Stochastic Mechanics, N. Sri Namachchivaya and W. Kliemann , CRC Mathematical Modeling Series, CRC Press. 95-119.
  4. J. P. Cusumano, C. Pierre, S.T. Wu. (1985). "Aerospace Structures: Nonlinear Dynamics and System Response", Chaos in Nonlinear Dynamical Systems,.
  5. C. Pierre. (1993). "Structural Dynamics of Complex and Large Scale Systems", ASME DE-Vol. 59 (Proceedings of the 14th Biennial Conference on Mechanical Vibrations and Noise), C. Pierre and N.C. Perkins.
  6. C. Pierre. (1990). "Vibration Localization by Disorder - A Viable Alternative to Damping?", Elastic Wave Propagation and Ultrasonic Nondestructive Evaluation, S. K. Datta, J. D. Achenbach and Y. S. Rajapakse, Elsevier Science Publishers B. V. .
  7. C. Pierre with E.H. Dowell. (1985). "Chaotic Oscillations in Mechanical Systems", Chaos in Nonlinear Dynamical Systems, J. Chandra, SIAM.
Journals
  1. A. Batailly, M. Legrand and C. Pierre. (2016). "Full 3D Rotor/Stator Interaction Simulations in Aircraft Engines with Time-Dependent Angular Speed", Journal of Engineering for Gas Turbines and Power, Paper No. GTP-16-1337. 139.
  2. B.J. Olson, S.W. Shaw, C.Z. Shi, C. Pierre, and R.G. Parker. (2014). "Circulant Matrices and their Application to Vibration Analysis", Applied Mechanics Reviews. 66 (4).
  3. M.B. Meingast, M. Legrand, and C. Pierre. (2014). "A Linear Complementarity Problem Formulation for Periodic Solutions to Unilateral Contact Problems", International Journal of Non-linear Mechanics, 66 18-27.
  4. N.V. Perepelkin, Y.V. Mikhlin, and C. Pierre. (2013). "Non-linear Normal Forced Vibration Modes in Systems with Internal Resonance", International Journal of Non-linear Mechanics, 57 102-115.
  5. S. Gozen, B.J. Olson, S.W. Shaw, and C. Pierre. (2012). "Resonance Suppression in Multi-Degree-of-Freedom Rotating Flexible Structures Using Order-Tuned Absorbers", ASME Journal of Vibration and Acoustics, 134 (6), 061016.
  6. K.V. Avramov, E.A. Strelnikova, and C. Pierre. (2012). "Resonant Many-Mode Periodic and Chaotic Self-Sustained Aeroelastic Vibrations of Cantilever Plates with Geometrical Non-Linearities in Incompressible Flow", Nonlinear Dynamics, 70 (2), 1335-1354.
  7. M. Legrand, A. Batailly, B. Magnain, P. Cartraud, and C. Pierre. (2012). "Full Three-Dimensional Investigation of Structural Contact Interactions in Turbomachines", Journal of Sound and Vibration, 331 (11), 2578-2601.
  8. M. Legrand, A. Batailly and C. Pierre. (2011). "Numerical Investigation of Abradable Coating Removal through Plastic Constitutive Law in Aircraft Engine", ASME Journal of Computational and Nonlinear Dynamics, 7 (1).
  9. A. Batailly, M. Legrand, P. Cartraud and C. Pierre. (2010). "Assessment of Reduced Models for the Detection of Modal Interaction through Rotor Stator Contacts", Journal of Sound and Vibration, 329 (26), 5546-5562.
  10. V. Ganine, D. Laxalde, H. Michalska and C. Pierre. (2011). "Parameterized Reduced Order Modeling of Misaligned Stacked Disks Rotor Assemblies", Journal of Sound and Vibration, 330 (3), 445-460.
  11. D. Laxalde and C. Pierre. (2011). "Modeling and Analysis of Multi-Stage Systems of Mistuned Bladed Disks", Computers and Structures, 89 316-324.
  12. A. Saito, B. Epureanu, M.P. Castanier and C. Pierre. (2010). "Node Sampling for Nonlinear Vibration Analysis of Structures with Intermittent Contact", AIAA Journal, 48 (9), 1903-1915.
  13. S. Roques, M. Legrand, P. Cartraud, C. Stoisser and C. Pierre. (2010). "Modeling of a Rotor Speed Transient Response with Radial Rubbing", Journal of Sound and Vibration, 329 (5), 527-546.
  14. Saito, M.P. Castanier and C. Pierre. (2009). "Estimation and Veering Analysis of Nonlinear Resonant Frequencies of Cracked Plates", Journal of Sound and Vibration, 326 (3-5), 725-739.
  15. A. Saito, M.P. Castanier and C. Pierre. (2009). "Effects of a Cracked Blade on Mistuned Turbine Engine Rotor Vibration", ASME Journal of Vibration and Acoustics, 131 (6), 061006.
  16. K.V. Avramov, O.S. Galas, O.K. Morachkovskii, and C. Pierre. (2009). "Analysis of Flexural-Flexural-Torsional Nonlinear Vibrations of Twisted Rotating Beams with Cross-Sectional Deplanation", Strength of Materials, 41 (2), 200-208.
  17. J.A. Judge, C. Pierre, and S.L. Ceccio. (2009). "Experimental Mistuning Identification in Bladed Disks using a Component-Mode-Based Reduced-Order Model", AIAA Journal, 47 (5), 1277-1287.
  18. M. Legrand, C. Pierre, and B. Peseux. (2010). "Structural Modal Interaction of a Four Degree-of-Freedom Bladed Disk and Casing Model", ASME Journal of Computational and Nonlinear Dynamics, 5 (4), 041013.
  19. V. Ganine, M. Legrand, H. Michalska, and C. Pierre. (2009). "A Sparse Preconditioned Iterative Method for Vibration Analysis of Geometrically Mistuned Bladed Disks", Computers and Structures, 87 (5-6), 342-354.
  20. Saito, M.P. Castanier, C. Pierre, and O. Poudou. (2009). "Efficient Nonlinear Vibration Analysis of the Forced Response of Rotating Cracked Blades", ASME Journal of Computational and Nonlinear Dynamics, 4 (1), 011005-1 - 011005-10.
  21. M. Legrand, C. Pierre, P. Cartraud, and J.-P. Lombard. (2009). "Two-Dimensional Modeling of an Aircraft Engine Structural Bladed Disk-Casing Modal Interaction", Journal of Sound and Vibration, 319 (1-2), 366-391.
  22. Z. He, B.I. Epureanu, and C. Pierre. (2008). "Convergence Predictions for Aeroelastic Calculations of Tuned and Mistuned Tuned Bladed Disks", Journal of Fluids and Structures, 24 732-749.
  23. S.-H. Lim, R. Bladh, M.P. Castanier, and C. Pierre. (2007). "Compact, Generalized Component Mode Mistuning Representation for Modeling Bladed Disk Vibration", AIAA Journal, 45 (9), 2285-2298.
  24. S.-Y. Lee, M.P. Castanier, and C. Pierre. (2007). "Statistical Approximations of Vibration Power Flow for Complex Structures with Uncertainties", International Journal of Reliability and Safety, 1 (3), 260-289.
  25. K.V. Avramov, C. Pierre, and N. Shiraeva. (2008). "Non-Linear Equations of Flexural−Flexural−Torsional Oscillations of Rotating Beams with Arbitrary Cross-Section", International Applied Mechanics, 44 (5), 582-589.
  26. K.V. Avramov, C. Pierre, and N. Shyriaieva. (2007). "Localization of Energy in Nonlinear Systems with Two Degrees of Freedom", International Applied Mechanics, 43 (5), 568-576.
  27. A. Kozmin, Y. Mikhlin, and C. Pierre. (2008). "Transient in a two-DOF nonlinear system", Nonlinear Dynamics, 51 (1-2), 141-154.
  28. Z. He, B.I. Epureanu, and C. Pierre. (2007). "Parametric Study of the Aeroelastic Response of Mistuned Bladed Disks", Computers and Structures, 85 852-865.
  29. Z. He, B.I. Epureanu, and C. Pierre. (2007). "Fluid-Structural Coupling Effects on the Dynamics of Mistuned Bladed Disks", AIAA Journal, 45 (3), 552-561.
  30. M. Legrand, S. Roques, C. Pierre, B. Peseux, and P. Cartraud. (2006). "n-Dimensional Harmonic Balance Method Extended to Non-Explicit Nonlinearities", European Journal of Computational Mechanics, 15 (1-3), 269-280.
  31. M.P. Castanier and C. Pierre. (2006). "Modeling and Analysis of Mistuned Bladed Disk Vibration: Status and Emerging Directions", AIAA Journal of Propulsion and Power, 22 (2), 384-396.
  32. S.W. Shaw and C. Pierre. (2006). "The Dynamic Response of Tuned Impact Absorbers for Rotating Flexible Structures", ASME Journal of Computational and Nonlinear Dynamics, 1 (1), 13-24.
  33. S.-H. Lim, C. Pierre, and M.P. Castanier. (2006). "Predicting Blade Stress Levels Directly from Reduced-Order Vibration Models of Mistuned Bladed Disks", ASME Journal of Turbomachinery, 128 (1), 206 - 210.
  34. C. Pierre, D. Jiang, and S.W. Shaw. (2006). "Nonlinear Normal Modes and their Application in Structural Dynamics", Mathematical Problems in Engineering, 2006 15.
  35. Z.-D. Ma, H. Wang, N. Kikuchi, C. Pierre, and B. Raju. (2006). "Experimental Verification and Prototyping of Optimum Designs Obtained from Topology Optimization", Structural and Multidisciplinary Optimization, 31 (5), 333-343.
  36. Z.-D. Ma, N. Kikuchi, C. Pierre, and B. Raju. (2006). "Multidomain Topology Optimization for Structural and Material Designs", ASME Journal of Applied Mechanics, 73 (4), 565-573.
  37. D. Jiang, C. Pierre, and S.W. Shaw. (2005). "Nonlinear Normal Modes for Vibratory Systems under Harmonic Excitation", Journal of Sound and Vibration, 288 (4-5), 791-812.
  38. D. Jiang, C. Pierre, and S.W. Shaw. (2005). "The Construction of Nonlinear Normal Modes for Systems with Internal Resonance", International Journal of Non-Linear Mechanics, 40 (5), 729-746.
  39. P. Apiwattanalunggarn, S.W. Shaw, and C. Pierre. (2005). "Component Mode Synthesis Using Nonlinear Normal Modes", Nonlinear Dynamics, 41 17-46.
  40. C. Pierre, N. Vlahopoulos, Z.-D. Ma, M.P. Castanier, S.-Y. Lee, A. Wang, K.K. Choi, N.H. Kim, and J. Dong. (2004). "Advanced Structure Methodologies for Next-Generation Ground Vehicles, Part 2: Case Study", International Journal of Heavy Vehicle Systems, 11 (3-4), 282-302.
  41. C. Pierre, N. Vlahopoulos, Z.-D. Ma, M.P. Castanier, S.-Y. Lee, A. Wang, K.K. Choi, N.H. Kim, and J. Dong. (2004). "Advanced Structure Methodologies for Next-Generation Ground Vehicles, Part 1: Basic Theories", International Journal of Heavy Vehicle Systems, 11 (3-4), 257-281.
  42. Z.-D. Ma, H. Wang, N. Kikuchi, C. Pierre, and B. Raju. (2004). "Substructure Design Using a Multi-Domain Multi-Step Topology Optimization", SAE Journal of Passenger Cars - Mechanical Systems, 1349-1358.
  43. Y.-C. Tan, M.P. Castanier, and C. Pierre. (2005). "Power Flow Analysis of Complex Structures Using Characteristic Constraint Modes", AIAA Journal, 43 (6), 1360-1370.
  44. D. Jiang, C. Pierre, and S.W. Shaw. (2004). "Large-Amplitude Nonlinear Normal Modes of Piecewise Linear Systems", Journal of Sound and Vibration, 272 869-891.
  45. S. Nacivet, C. Pierre, F. Thouverez, and L. Jé zé quel. (2003). "A Lagrangian Frequency-Time Method for the Vibration of Dry-Friction-Damped Systems", Journal of Sound and Vibration, 265 (1), 201-219.
  46. J.A. Judge, S.L. Ceccio, and C. Pierre. (2003). "Traveling-Wave Excitation and Optical Measurement Techniques for Non-Contacting Investigation of Bladed Disk Dynamics", Shock and Vibration Digest, 35 (3), 183-190.
  47. H. Yoo and C. Pierre. (2003). "Modal Characteristic of a Rotating Rectangular Cantilever Plate", Journal of Sound and Vibration, 259 (1), 81-96.
  48. R. Bladh, C. Pierre, and M.P. Castanier. (2003). "Numerical Instability of Classical Free-Interface Component Mode Synthesis Techniques", AIAA Journal, 41 (8), 1621-1624.
  49. N.H. Kim, J. Dong, K.K. Choi, N. Vlahopoulos, Z.-D. Ma, M.P. Castanier, and C. Pierre. "Design Sensitivity Analysis for Sequential Structural-Acoustic Problems", Journal of Sound and Vibration, 263 (3), 569-591.
  50. M.P. Castanier and C. Pierre. (2003). "Using Intentional Mistuning in the Design of Turbomachinery Rotors", AIAA Journal, 40 (10), 2077-2086.
  51. J.A. Morgan, C. Pierre, and G.M. Hulbert. "Baseband Methods of Component Mode Synthesis for Non-Proportionally Damped Systems", Journal of Mechanical Systems and Signal Processing, 3 (17), 589-598.
  52. M. Legrand, D. Jiang, C. Pierre, and S.W. Shaw. (2004). "Nonlinear Normal Modes of a Rotating Shaft Based on the Invariant Manifold Method", International Journal of Rotating Machinery, 10 (4), 319-335.
  53. P. Apiwattanalunggarn, S.W. Shaw, C. Pierre, and D. Jiang. (2003). "Finite-Element-Based Nonlinear Modal Reduction of a Rotating Beam with Large-Amplitude Motion", Journal of Vibration and Control, 9 235-263.
  54. C. Pierre. (2001). "Localization (MS 99)", S. G. Braun, D. J. Ewins, and S. S. Rao, Encyclopedia of Vibration, Academic Press.
  55. M.-H. H. Shen and C. Pierre. (2001). "'Authors' Reply: Free Vibrations of Beams with a Single-Edge Crack", Journal of Sound and Vibration. 244 737.
  56. Y.-C. Tan, M.P. Castanier, and C. Pierre. "Approximation of Power Flow Between Two Coupled Beams Using Statistical Energy Methods", ASME Journal of Vibration and Acoustics, 123 (4), 311-324.
  57. R. Bladh, C. Pierre, M.P. Castanier, and M.J. Kruse. (2002). "Dynamic Response Predictions for a Mistuned Industrial Turbomachinery Rotor Using Reduced Order Modeling", ASME Journal of Engineering for Gas Turbine and Power, 124 (2), 311-324.
  58. R. Bladh, M.P. Castanier, and C. Pierre. (2003). "Effects of Multistage Coupling and Disk Flexibility on Mistuned Bladed Disk Dynamics", ASME Journal of Engineering for Gas Turbine and Power, 125 (1), 121-130.
  59. E. Pesheck, C. Pierre, and S.W. Shaw. (2002). "A New Galerkin-based Approach for Accurate Nonlinear Normal Modes through Invariant Manifolds", Journal of Sound and Vibration, 249 (5), 971-993.
  60. E. Pesheck, C. Pierre, and S.W. Shaw. (2002). "Modal Reduction of a Nonlinear Rotating Beam through Nonlinear Normal Modes", ASME Journal of Vibration and Acoustics, 124 (2), 229-236.
  61. M.P. Castanier, Y.-C. Tan, and C. Pierre. (2001). "Characteristic Constraint Modes for Component Mode Synthesis", AIAA Journal, 39 (6), 1182-1187.
  62. E. Pesheck, C. Pierre, and S.W. Shaw. (2001). "Accurate Reduced Order Models for a Simple Rotor Blade Model Using Nonlinear Normal Modes", Mathematical and Computer Modelling, 33 (1), 1085-1097 .
  63. R. Bladh, M.P. Castanier, and C. Pierre. (2001). "Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks, Part II: Application", ASME Journal of Engineering for Gas Turbine and Power, 123 (1), 100-108.
  64. R. Bladh, M.P. Castanier, and C. Pierre. (2001). "Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks, Part I: Theoretical Models", ASME Journal of Engineering for Gas Turbine and Power, 123 (1), . 89-99.
  65. J.A. Judge, C. Pierre, and O. Mehmed. (2001). "Experimental Investigation of Mode Localization and Forced Response Amplitude Magnification for a Mistuned Bladed Disk", ASME Journal of Engineering for Gas Turbine and Power, 123 (4), 940-950.
  66. C. Pierre and 12 co-authors. (1999). "Modeling and Simulation of an M1 Abrams Tank with Advanced Track Dynamics and Integrated Virtual Diesel Engine", Mechanics of Structures and Machines, 27 (4), 453-505.
  67. E. Pesheck, N. Boivin, C. Pierre, and S.W. Shaw. (2001). "Nonlinear Modal Analysis of Structural Systems Using Multi-Mode Invariant Manifolds", Nonlinear Dynamics, 25 (1-3), 183-205.
  68. D. Bouzit and C. Pierre. (2000). "Wave Localization and Conversion Phenomena in Multi-Coupled Multi-Span Beams", Chaos, Solitons and Fractals, 11 (10), 1575-1596.
  69. J.A. Morgan, C. Pierre, and G.M. Hulbert. (1999). "Non-Baseband Residual Flexibility Method of Component Mode Synthesis for Proportionally Damped Systems", AIAA Journal, 219 (10), 1285-1291.
  70. P.D. Cha and C. Pierre. (1999). "Imposing Nodes to the Normal Modes of a Linear Elastic Structure", Journal of Sound and Vibration, 219 (4), 669-687.
  71. C. Pierre, S.W. Shaw, and E. Pesheck. (1999). "Modal Analysis-Based Reduced-Order Models for Nonlinear Structures— An Invariant Manifold Approach", Shock and Vibration Digest, 31 (1), 3-16 .
  72. P.D. Cha and C. Pierre. "Frequency Analysis of a Linear Elastic Structure Carrying a Chain of Oscillators", Journal of Engineering Mechanics, 125 (5), 587-591.
  73. R. Bladh, M.P. Castanier, and C. Pierre. (1999). "Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies with Shrouds", ASME Journal of Engineering for Gas Turbine and Power, 121 (3), 515-522.
  74. H.H. Yoo, C. Pierre, and R.R. Ryan. (1997). "A New Formulation for the Torsional Vibration Analysis of Rotating Cantilever Rods", KSME International Journal, 11 (2), 143-154.
  75. C. Pierre, M.P. Castanier, and S.-B. Choi. (1997). "On Developing New Statistical Energy Methods for the Analysis of Vibration Transmission in Complex Vehicle Structures", Mechanics of Structures and Machines, 25 (1), 87-101.
  76. J.A. Morgan, C. Pierre, and G.M. Hulbert. (1997). "Forced Response of Coupled Substructures Using Experimentally-Based Component Mode Synthesis", AIAA Journal, 35 (2), 334-339.
  77. J.A. Morgan, C. Pierre, and G.M. Hulbert. (1998). "Calculation of Component Mode Synthesis Matrices from Measured Frequency Response Functions. Part II: Application", ASME Journal of Vibration and Acoustics, 120 (2), 509-516.
  78. J.A. Morgan, C. Pierre, and G.M. Hulbert. (1998). "Calculation of Component Mode Synthesis Matrices from Measured Frequency Response Functions. Part I: Theory", ASME Journal of Vibration and Acoustics, 120 (2), 503-508.
  79. G. Ulsoy, C. Pierre, and S. Choi. (1998). "Vibration Localization in Rotating Shafts. Part II: Experiment", ASME Journal of Vibration and Acoustics, 120 (1), 149-155.
  80. G. Ulsoy, C. Pierre, and S. Choi. (1998). "Vibration Localization in Rotating Shafts. Part I: Theory", ASME Journal of Vibration and Acoustics, 120 (1), 138-148.
  81. C. Pierre, M.P. Castanier, and W.-J. Chen. (1996). "Wave Localization in Multi-Coupled Periodic Structures: Application to Truss Beams", ASME Applied Mechanics Reviews, 49 (2), 65-86.
  82. M.P. Castanier, G. Ottarsson, and C. Pierre. (1997). "A Reduced-Order Modeling Technique for Mistuned Bladed Disks", ASME Journal of Vibration and Acoustics. 119 (3), 439-447.
  83. G. Ottarsson and C. Pierre. (1997). "Vibration and Wave Localization in a Nearly Periodic Beaded String", Journal of the Acoustical Society of America, 101 (3), 3430-3442.
  84. P.D. Cha and C. Pierre. (1998). "Free Vibrations of Uniform Timoshenko Beams with Lumped Attachment", Journal of Sound and Vibration, 211 (2), 273-276.
  85. P.D. Cha and C. Pierre. (1998). "Free Vibrations of Uniform Timoshenko Beams with Lumped Attachment", Journal of Sound and Vibration, 211 (2), 273-276.
  86. M.P. Castanier and C. Pierre. (1997). "Predicting Localization Via Lyapunov Exponent Statistics", Journal of Sound and Vibration. 203 (1), 151-157.
  87. P.D. Cha and C. Pierre. (1997). "A Statistical Investigation of the Forced Response of Finite, Nearly Periodic Assemblies", Journal of Sound and Vibration, 203 158-168.
  88. N. Boivin, C. Pierre, and S.W. Shaw. (1995). "Non-Linear Modal Analysis of Structural Systems Featuring Internal Resonances", Journal of Sound and Vibration, 182 (2), 336-41.
  89. D. Murthy, C. Pierre, and G. Ottarsson. (1995). "Efficient Design Constraint Accounting for Mistuning Effects in Engine Rotors", AIAA Journal, 33 (5), 960-962.
  90. N. Boivin, C. Pierre, and S.W. Shaw. (1995). "Non-Linear Normal Modes, Invariance, and Modal Dynamics Approximations of Non-Linear Systems", Nonlinear Dynamics, 8 (3), 315-346.
  91. G. Ottarsson and C. Pierre. (1996). "A Transfer Matrix Approach to Free Vibration Localization in Mistuned Blade Assemblies", Journal of Sound and Vibration, 197 (5), 589-618.
  92. D. Bouzit and C. Pierre. (1995). "An Experimental Investigation of Vibration Localization in Disordered Multi-Span Beams", Journal of Sound and Vibration, 187 (4), 649-669.
  93. D. Bouzit and C. Pierre. (1995). "Localization of Vibration in Disordered Multi-Span Beams with Damping", Journal of Sound and Vibration. 187 (4), 625-648.
  94. M.P. Castanier and C. Pierre. (1995). "Lyapunov Exponents and Localization Phenomena in Multi-Coupled Nearly-Periodic Systems", Journal of Sound and Vibration, 183 (3), 493-515.
  95. N. Al-jawi, A.G. Ulsoy, and C. Pierre. (1995). "Vibration Localization in Band/Wheel Systems: Theory and Experiment", Journal of Sound and Vibration, 179 (2), 289-312.
  96. N. Al-jawi, C. Pierre, and A.G. Ulsoy. (1995). "Vibration Localization in Dual-Span, Axially Moving Beams. Part II: Perturbation Analysis", Journal of Sound and Vibration, 179 (2), 267-287.
  97. N. Al-jawi, C. Pierre, and A.G. Ulsoy. (1995). "Vibration Localization in Dual-Span, Axially Moving Beams. Part I: Formulation and Results", Journal of Sound and Vibration, 179 (2), 243-266.
  98. S.R. Hsieh, S.W. Shaw, and C. Pierre. (1994). "Normal Modes for Large Amplitude Vibration of a Cantilever Beam", International Journal of Solids and Structures, 31 (14), 1981-2014.
  99. M.P. Castanier and C. Pierre. (1993). "Individual and Interactive Mechanisms for Localization and Dissipation in a Mono-Coupled Nearly Periodic Structure", Journal of Sound and Vibration, 168 (3), 479-506.
  100. S.W. Shaw and C. Pierre. (1994). "Normal Modes of Vibration for Nonlinear Continuous Systems", Journal of Sound and Vibration, 169 319-347.
  101. C. Pierre, T.E. Smith, and D.V. Murthy. (1994). "Localization of Aeroelastic Modes in Mistuned High-Energy Turbines", Journal of Propulsion and Power, 10 (3), 318-328.
  102. C. Pierre and D.V. Murthy. (1992). "Aeroelastic Modal Characteristics of Mistuned Blade Assemblies: Mode Localization and Loss of Eigenstructure", AIAA Journal, 30 (10), 2483-2496.
  103. C. Pierre and S.W. Shaw. (1991). "Mode Localization due to Symmetry-Breaking Nonlinearities", International Journal of Bifurcation and Chaos. 1 (2), 471-475.
  104. S.W. Shaw and C. Pierre. (1993). "Normal Modes for Nonlinear Vibratory Systems", Journal of Sound and Vibration, 164 (1), 85-124.
  105. S.H. Choi, C. Pierre, and A.G. Ulsoy. (1992). "Consistent Modeling of Rotating Timoshenko Shafts Subject to Axial Loads", ASME Journal of Vibration and Acoustics, 114 249-259.
  106. D. Bouzit and C. Pierre. (1992). "Vibration Confinement Phenomena in Disordered, Mono-Coupled, Multi-Span Beams", ASME Journal of Vibration and Acoustics, 114 521-530.
  107. M.-H. H. Shen and C. Pierre. (1994). "Free Vibrations of Beams with a Single-Edge Crack", Journal of Sound and Vibration, 170 (2), 237-259.
  108. S.W. Shaw and C. Pierre. (1991). "Normal Modes and Invariant Manifolds", Journal of Sound and Vibration, 150 170-173.
  109. M.-H. H. Shen and C. Pierre. (1990). "Natural Modes of Bernoulli-Euler Beams with Symmetric Cracks", Journal of Sound and Vibration, 138 (1), 115-134.
  110. S.T. Wei and C. Pierre. (1990). "Statistical Analysis of the Effects of Mistuning on the Forced Response of Cyclic Assemblies", AIAA Journal, 28 (5), 861-868.
  111. C. Pierre. (1990). "Weak and Strong Vibration Localization in Disordered Structures: A Statistical Investigation", Journal of Sound and Vibration, 139 (1), 111-132.
  112. S.T. Wei and C. Pierre. (1989). "Effects of Dry Friction Damping on the Occurrence of localized Forced Vibrations in Nearly Cyclic Structures", Journal of Sound and Vibration, 129 (3), 397-416.
  113. C. Pierre. (1983). "Root Sensitivity to Parameter Uncertainties: A Statistical Approach", International Journal of Control. 49 (2), 521-532.
  114. C. Pierre. (1988). "Mode Localization and Eigenvalue Loci Veering Phenomena in Disordered Structures", Journal of Sound and Vibration, 126 (3), 485-502.
  115. C. Pierre and P.D. Cha. (1989). "Strong Mode Localization in Nearly Periodic Disordered Structures", AIAA Journal, 27 (2), 227-241.
  116. S.T. Wei and C. Pierre. "Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry. Part I: Free Vibrations", ASME Journal of Vibration, Acoustics, Stress and Reliability Design, 110 (4), 439-449.
  117. C. Pierre and R.H. Plaut. (1989). "Curve Veering and Mode Localization in a Buckling Problem", Journal of Applied Mathematics and Physics (ZAMP), 40 758-761.
  118. P.D. Cha and C. Pierre. (1989). "Eigensolution of Periodic Assemblies of Multi-Mode Component Systems", Journal of Sound and Vibration, 129 (1), 168-174.
  119. C. Pierre. "Comments on Rayleigh's Quotient and Perturbation Theory for the Eigenvalue Problem", ASME Journal of Applied Mechanics, 129 (1), 986-988.
  120. C. Pierre. (1987). "Eigensolution Perturbation for Systems with Perturbed Boundary Conditions", Journal of Sound and Vibration, 112 (1), 167-172.
  121. C. Pierre, D.M. Tang, and E.H. Dowell. (1987). "Localized Vibrations of Disordered Multi-Span Beams: Theory and Experiment", AIAA Journal, 25 (9), 1249-1257.
  122. C. Pierre and E.H. Dowell. (1987). "Localization of Vibrations by Structural Irregularity", Journal of Sound and Vibration. 114 (3), 594-564.
  123. C. Pierre, A.A. Ferri, and E.H. Dowell. (1985). "Multi-Harmonic Analysis of Dry Friction Damped Systems Using an Incremental Harmonic Balance Method", ASME Journal of Applied Mechanics. 52 (4), 958-964.
  124. C. Pierre and E.H. Dowell. (1985). "A Study of Dynamic Instability of Plates by an Extended Incremental Harmonic Balance Method", ASME Journal of Applied Mechanics, 52 (3), 693-697.