Windows XP/Vista 64-bit MFP

From ITwiki

< Windows XP
Revision as of 09:48, 15 November 2012 by Eshaw (Talk | contribs)
Jump to: navigation, search

Contents

Installation and Printing Instructions

These instructions will guide you through the installation and use of the MFP printer in the PC Lab, Library, and Howe Center.

The pictures in this article were taken in Windows Vista, but these same instructions apply for the below operating systems.

  • Windows XP 64-bit
  • Windows Vista 64-bit
  • Windows 7 64-bit

Step 1 - The Installation File

The drivers and installation file for the MFP printer can be found on Storage01. The path to the file on storage01\public\uniprint\64bit Uniprint drivers. Here, double click on the file ALL_MFP_SQ_for_x64.exe.

Step 2 - Installing

Click Install to begin.

This installation will install both the printer and the drivers for it, so your machine will automatically be able to find it over the network.

Click the finish button once the installation has finished. The MFP printer should now be ready for use.

Step 3 - Printing

To print to the PC Lab, make sure the printer selected is "CC MFP SQ Spool Queue." To print to the Library, make sure the printer selected is "Library Canon Spool Queue." To print to the Howe Center, make sure the printer selected is "Howe Center MFP SQ Spool Queue."

For example, the following picture is shows the printer for the PC Lab as the selected printer.

When you click ok, you will be prompted by a window asking for your Stevens username. Enter your myStevens username and a password for the print job. This does NOT have to be the same as your myStevens password.

Hit print. Your job will then be sent to the MFP printer. For printing options and pricing, see the printing options and pricing page.

Troubleshooting

If you encounter problems during installation, try reinstalling the printer. If you have any problems or questions, sent an email to the Helpdesk at helpdesk@stevens.edu or call us at x5500.

Personal tools